Examples are valid for :
TMflow Software version : All version
TM Robot Hardware version : All version
Other specific requirements : None
Note that older or newer software versions may have different results
Please follow the instructions given in the Chapter Removal of the Robot Arm and Tightening of Hardware Installation Manual while transporting and installing your robot. Have two people carry the robot at the same time to prevent it from falling off. If the robot does falls, the impact will be amplified through the robot to the other joints than the one coming first in contact with the ground, and in turn cause varying degrees of damage (depending on the robot’s current posture and the point of the impact). For example, when the robot is dropped to the ground in its packaging posture, Joint 3 sustains the most damage.
Picture explanation :
Left : Correct way of moving the robot *Do not drop it!*
Middle : Correct way of moving the robot *Do not drop it!*
Right : When the robot is dropped to the ground in its packaging posture, Joint 3 sustains the most damage *Do not drop the robot !*
