| Item |
VMG |
| Type |
Whole Surface Sponge type |
Aligned Vacuum Pads type |
| Code |
2618-SE5L |
2618-S7L |
3725-SE7L |
5738-SE11L |
2618-P5L |
2618-P7L |
3725-P7L |
5738-P11L |
| Suction surface size |
260 x 180 |
370 x 250 |
570 x 380 |
260 x 180 |
370 x 250 |
570 x 380 |
| No. of rows |
5 rows |
7 rows |
7 rows |
11 rows |
5 rows |
7 rows |
7 rows |
11 rows |
| Fluid medium |
Air, vacuum（※1） |
| Operating pressure range |
Only for Vacuum Generator spec. |
0.3～0.7MPa |
| Rated supply pressure |
0.5MPa |
| Noise level |
70㏈（A） |
| Operating vacuum pressure |
Only for Vacuum Pump spec. |
-100～0kPa |
| Operating temp. range |
5～50℃（No freezing） |
| Theoretical suction force（※2、3） |
Safety factor 1/4（Horizontal lifting）(N) |
296.1 |
277.3 |
641.6 |
1546.4 |
453.7 |
277.3 |
983.1 |
2369.5 |
| Safety factor 1/8（Vertical lifting）(N) |
148.1 |
138.6 |
320.8 |
773.2 |
226.9 |
138.6 |
491.5 |
1184.7 |
| Accessory |
Robot flange mounting plate, Digital Pressure Sensor with 3-color dual display, Push-in fitting for air piping |
| Fixed orifice(option) |
Fixed orifice(option)or
coupling orifice(option) |
| Suppresses vacuum degradation due to leakage from non-absorbed areas by attaching an orifice to regulate the flow rate |
|
The coupling orifice type makes it easy to attach/detach the pad. Pads that are not required for suction can be removed thanks to the socket’s built-in stop mechanism. |
*1 “Fluid medium: vacuum” is only for vacuum pump spec.
*2 Theoretical suction force at a vacuum of -80 kPa.
*3 Do not exceed the maximum load capacity of 100 kg of the main body mounting section, including the weight of the gripper body and inertia forces during transport.
