| Case description: | This section describes possible faults during start up of the IPC and suggested actions for each type of fault. | |
| Result: | After pressing the power button on the Stick, there is no boot response in the IPC, and the LCM has no screen. | |
| Possible reason: | The following are possible reasons that the IPC cannot be turned on.：
1)AC has no power or power cord damage 2)The power cable is loose 3)AC power input to the relay board is loose 4)Components on the Relay Board burned out 5)Stick or IPC damage 6)power supply 300W is damage |
Common error code
NA |
| Symptom: |  |
|
