Skip to content
카테고리:
Gripper_Vacuum

Nihon PISCO

HML Unit Dedicated for Techman Robots

제품 특징

  • Easy setup with one air tube and one cable.
  • Peripheral devices required for suction are integrated into a unit.
  • Vacuum generator with blow-off function enables faster suction and release cycles.
  • Lightweight and compact design.
  • Main bar and pad bar include scales for easy positioning.
  • Wide variety of pads supports various workpiece shapes (sold separately).

Specifications

▍Specifications

Common Operating Temperature Range 5~50°C(No Freezing)
Operating Pressure Range 0.2~0.7MPa
Rated Voltage DC24V
Ejector Rated Supply Pressure 0.5MPa
Nozzle Diameter ø1.2mm
Ultimate Vacuum -93.1kPa
Suction Flow 38L/min(ANR)
Air Consumption 70L/min(ANR)
Exhaust Specification Atmospheric Release
* For detailed specifications of the solenoid valve and digital pressure sensor with 3-color dual display, refer to the table below.

▍Solenoid Valve Specifications

Pilot Valve Operating System Direct Acting Operation
Valve Structure Elastomer Seal, Poppet Valve
Tolerance of Voltage Range DC21.6~26.4V
Power Consumption (With LED) 0.8W
Surge Protection Circuit Surge Absorber
Main Valve Fluid Medium Air
Operating Pressure Range 0.15~0.7MPa
Pressure Resistance 1.05MPa
Operating Temp. Range 5~50°C
Installing Direction No Restriction (*1)
Operating system Pilot-Operated
Valve Structure Spool Valve (Elastic Seal)
No. of Positions 2 Positions
No. of Ports 3 Ports
Valve Function Single
Switching Method Normally Closed
Response Time(*2) →ON 13msec
→OFF 18msec
Max. Operation Cycle 5Hz
Lubrication Not Required
*1 Refer to the warnings in the individual precautions for the Solenoid Valve SVB published on our official website.

*2 Values based on a 0.5 MPa air supply pressure.

Flow Characteristics Effective Sectional
Area(㎟)
1(P)→2(A) 3.4[0.18]
2(A)→3(R1) 3.2[0.17]
* Values in [ ] represent Cv values.

▍Specifications of Digital Pressure Sensor with 3-color dual display

Rated Pressure Range -101.3~0.0kPa
Proof Pressure 300kPa
Fluid Medium Air, non-corrosive/non-flammable gas
Power Supply 12-24VDC (Ripple±10% or less)
Current Consumption 40mA or less(No-load)
Switch Output NPN Open Collector
Max. Load Current:125mA
Max. Supply Voltage:30VDC
Internal Voltage Drop: 1.5 V or less
Repeatability ±0.2% F.S. ±1 digit or less
Hysteresis One-Point Set Mode Adjustable(*)
Hysteresis Mode
Window Comparator Mode
Response Time 2.5 ms or less (Chattering-proof function: 25ms, 100ms, 250m, 500ms, 1000ms, 1500ms selection)
Output Short Circuit Protection Equipped
Digital Display 3 colors (Red, Green, Orange) indication (Sampling rate:5 times/1sec.)
Indicator Accuracy ±2% F.S. ±1digit or less (at Ta=25±3ºC)
Switch ON indicator Orange 1&2 indicator
Analog Output (Voltage Output) Output Voltage:1 ~ 5V ± 2.5% F.S. or less (within rated pressure range)
Linearity: ± 1% F.S. or less, Output Impedance1k Ω
Environmental
Resistance
Protective structure Equivalent to IP40
Ambient Temp. Range At operation: 0~ 50ºC, At storing: -10–60°C (No dew condensation, and no freezing)
Ambient Hum. Range At operation or storing:35~ 85% RH (No dew condensation)
Voltage Proof 1000VAC 1min. (Between the lead wire and the case)
Insulation Proof 50MΩor more (500VDC) (Between the lead wire and the case)
Voltage Proof Double application 1.5mm or 100m/s2, 1min.10Hz~150Hz~10Hz, X, Y, Z each direction 2 hours.
Vibration Proof 100m/s2X, Y, Z each direction 3 times
Temperature Characteristics ±2% F.S.or less (at Ta=25ºC,Range0~+50ºC)
Cable Spec. Oil-resistance Cable (0.15 mm²)
* Hysteresis is adjustable (1~8 digits) in One point setting mode and Wind comparator mode.

 

Availability

Global

Website

Description

N/A

암 모델

Support All TM Model

하드웨어

N/A

소프트웨어

N/A
Mech Mind 用户手册 Mech Mind DOCS