카테고리:
OnRobot
Dual Quick Changer
제품 특징
- Dual gripper speeds cycle time and can improve productivity by 50% or more.
- The new Dual Quick Changer enables you to use our end-of-arm tools together in a single cycle. With this innovative solution you can use two RG2 grippers or an RG6 gripper with a VG10 – it’s entirely up to you. Quickly and seamlessly switch between OnRobot tools to maximize the utilization of your robots with the Dual Quick Changer.
- The Dual Quick Changer has built-in electric feed-through for OnRobot tools. You can connect various tools. You can even use a Quick Changer Tool Side if you wish to use a non-OnRobot tool as well.
OnRobot’s TM ROBOT support Page.
사양
구매 정보
호환성
사양
Technical data | Min | Typical | Max | |
Permissible force* [N] | – | – | 400* | |
Permissible torque* [Nm] | – | – | 50* | |
Rated payload* [kg] [lbs] | – – | – – | 20*44* | |
Repeatability [mm] | – | – | ±0.02 | |
IP Classification | 64 | |||
Operating life (Tool change) [cycles] | – | 5.000 | – | |
Operating life (Robot operation) [M cycles] | 10 | – | – |
구매 정보
No data was found
호환성
암 모델
하드웨어
소프트웨어