카테고리:
Nihon PISCO
제품 특징
- Vacuum grippers suitable for transfer of large workpieces.
- The suction surface is made of sponge (Rectangular ring shaped). Suitable for a wide range of workpieces.
- Vacuum generator built-in type and vacuum pump compatible type are available.
- Vacuum generator built-in type secures max. suction flow rate: 760L/min(*)
* Value for 3 built-in ejectors specification.
사양
구매 정보
호환성
사양
Item | VRG | |||
Type | Sponge(Rectangular ring type) | |||
Code | 1515 | 2617 | 4730 | |
Suction surface size | 150 x 150 | 260 x 170 | 470 x 300 | |
No. of rows | – | – | – | |
Fluid medium | Air, vacuum(※1) | |||
Operating pressure range | Only for Vacuum Generator spec. | 0.3~0.7MPa | ||
Rated supply pressure | 0.5MPa | |||
Noise level | 70㏈(A) | |||
Operating vacuum pressure | Only for Vacuum Pump spec. | -100~0kPa | ||
Operating temp. range | 5~50℃(No freezing) | |||
Theoretical suction force(※2、3) | Safety factor 1/4(Horizontal lifting)(N) | 235.8 | 326.2 | 1512.7 |
Safety factor 1/8(Vertical lifting)(N) | 117.9 | 163.1 | 756.4 | |
Accessory | Robot flange mounting plate, Digital Pressure Sensor with 3-color dual display, Push-in fitting for air piping | |||
Spacer(included) | ||||
The stroke can be adjusted to suit the workpiece by changing the height of the adjusting plate on the inside of the pad. Four suction strokes in total: 10, 15, 20, and 25 mm (factory setting: 25 mm). Adjustable in 5 mm increments. * For VRG1515: 8, 13, 18, and 23 mm (factory setting: 23mm). |
*1 “Fluid medium: vacuum” is only for vacuum pump spec.
*2 Theoretical suction force at a vacuum of -80 kPa.
*3 Do not exceed the maximum load capacity of 100 kg of the main body mounting section, including the weight of the gripper body and inertia forces during transport.
구매 정보
호환성