{"id":122992,"date":"2025-02-18T14:14:07","date_gmt":"2025-02-18T06:14:07","guid":{"rendered":"https:\/\/www.tm-robot.com\/?post_type=docs&p=122992"},"modified":"2025-02-18T14:32:20","modified_gmt":"2025-02-18T06:32:20","slug":"how-to-set-up-flying-trigger-camera","status":"publish","type":"docs","link":"https:\/\/www2.tm-robot.com\/en\/docs\/how-to-set-up-flying-trigger-camera\/","title":{"rendered":"How To Set Up Flying Trigger Camera"},"content":{"rendered":"

TMflow Software version: TMflow 2.20 or above versions<\/p>\n

TM Robot Hardware version: HW3.2 or above versions<\/p>\n

Note: Older or newer software versions may have different results.<\/p>\n

\n

Obtaining Hardware<\/h1>\n

How to Select a Camera, Lens, and IO Trigger Cables<\/h2>\n

The flying capture function requires a high-performance industrial camera and a suitable lens. Below are the recommended specifications:<\/p>\n

Camera Selection<\/strong>: This function requires an external camera and can only be used with TM Plug&Play Basler cameras<\/a> with a global shutter type.<\/p>\n

\"\"<\/a><\/p>\n

Lens Selection<\/strong> : Refer to the lens selection page on the Basler website<\/a> and choose an appropriate lens based on the working distance and field of view.<\/p>\n

\"\"<\/p>\n

IO trigger Line Connector<\/strong><\/p>\n

Ace and Ace 2 camera have different IO trigger line connector. If you need to purchase cables, you can visit the Basler website for selection.<\/p>\n