OnRobot Dual Quick Changer

Zurück

Weiter

Tool_Tool Changer

OnRobot

Dual gripper speeds cycle time and can improve productivity by 50% or more.
The new Dual Quick Changer enables you to use our end-of-arm tools together in a single cycle. With this innovative solution you can use two RG2 grippers or an RG6 gripper with a VG10 – it’s entirely up to you. Quickly and seamlessly switch between OnRobot tools to maximize the utilization of your robots with the Dual Quick Changer.
The Dual Quick Changer has built-in electric feed-through for OnRobot tools. You can connect various tools. You can even use a Quick Changer Tool Side if you wish to use a non-OnRobot tool as well.

OnRobot’s TM ROBOT support Page.

Click to Download

Specification

Purchase Information

Compatibility

Specification

Technical data	Min	Typical	Max
Permissible force* [N]	–	–	400*
Permissible torque* [Nm]	–	–	50*
Rated payload* [kg] [lbs]	– –	– –	2044
Repeatability [mm]	–	–	±0.02
IP Classification	64
Operating life (Tool change) [cycles]	–	5.000	–
Operating life (Robot operation) [M cycles]	10	–	–

Purchase Information

No data was found

Compatibility

TM Model