Examples are valid for:
TMflow Software version: 1.76.6300 or above.
TM Robot Hardware version: All
Other specific requirements: None
Note that older or newer software versions may have different results.

Precautions for Transporting the Techman Robot #

To prevent your robot from being damaged during transportation, please follow the guidelines below.

1. Adjust the arm to the packing pose and place it into the packaging box.
2. Use the original packaging when transporting or storing this product. The packaging is designed to protect the product from normal impacts and vibrations. However, you must still avoid exposing the package to extreme impacts and vibrations.
3. During transportation or storage, keep the product in a non-condensing environment with a temperature between -20°C and +60°C (-4°F to 140°F) and humidity of less than 75%.
4. Always keep the packaging upright during transportation or storage. Do not place the packaging sideways, upside down, or in any other non-upright position. Failure to follow these instructions may damage the product.
5. Follow the ESD (electrostatic discharge) procedure while installing or removing the robot.

How Should the Arm be Positioned Before Packing it for Transportation? #

Adjust the arm to the packing pose before packing it for transportation.

To do this, go to Settings > Posture Settings in TMflow and select Packing Pose.